Apply using roller or brush- Coverage per litre for 1 Coat: 12 m2/lt- Ceritified MS 3 and Eco Label
PURE WHITE is a premium quality odourless acrylic matt emulsion paint with outstanding durability for use on both interior and exterior walls. It has an excellent opacity and coverage. The paint is formulated with reduced the Volatile Organic Compounds which eliminates odours commonly found in alkyd based paints. Resistant to yellowing, the matt finish of the paint provides a long lasting whiteness to your interior. PURE WHITE is also washable which makes it perfect for spaces like kitchen that require frequent cleaning.
PURE WHITE is labelled 'Made in Moris' and is recommended for interior or exterior use in dry regions and for interior use in humid regions.
For all concrete, wood, metal or automotive related painting works, Find & Hire painters from Grab a Painter app.
From preparing your interior walls and ceilings to achieving a neat, professional finish, Grab a Painter will put you in touch
with the right people for the job.
The mobile app is available for download on Google PlayStore & Apple Store.
Apply two coats by roller or brush onto clean, dry and sealed surface.
For concrete and plaster, wash surface with water under high pressure, let dry followed by application of one thin coat of Wall Primer (< 50 μm).
IF the old coating and/or its substrate has blisters or other defects, it is advisable to remove the old coating. Remove by mechanical means or by stripping with paint remover. On powdered old coatings, apply 1 coat CLEAR BINDER.
IF substrate shows presence of fungi or algae, proceed as follows:
Apply FUNGICIDAL WASH by roller and leave to react for 12 h minimum. Rinse with high pressure water again and brush if necessary. Once dried, apply a coat of fungicidal treatment on the surface which will be coated the same day. Apply a thin coat of CLEAR BINDER where necessary and allow drying for 3 h minimum. Apply 2 coats of PURE WHITE paint, leaving each coat to dry 3 h minimum. Mixing ratio
Dilute with water: 15% for brush
15% for roller
30% for spray gun
Approximately 1h to touch dry can be over-coated after approximately 4h.