For a semi-gloss finish, the VIP SATIN is just what you need! Being an acrylic paint, it is easily washable and resists household stains. Ideally conceived for kitchen and bathrooms, it is recommended for interior use only. VIP Satin also provides good adhesion on previously painted wall surfaces. The paint is labelled 'Made in Moris' and is MS3 certified.
For all concrete, wood, metal or automotive related painting works, Find & Hire painters from Grab a Painter app.
From preparing your interior walls and ceilings to achieving a neat, professional finish, Grab a Painter will put you in touch with the right people for the job.
The mobile app is available for download on Google PlayStore & Apple Store.
Apply two coats by roller or brush onto clean, dry and sealed surface.
• For concrete and plaster, wash surface with water under high pressure, let dry, then apply one thin coat of Wall Primer (<50 µ).
• If the old coating and/or its substrate have blisters or other defects, then total removal of old coating must be done by mechanical means or by stripping with paint remover. On powder old coatings, apply 1 coat Clear Binder.
If substrate shows presence of fungi or algae, please proceed with the following surface preparations:
• Apply fungicidal wash by roller and leave to react for 12h minimum. Rinse with high pressure water again. Brush if necessary. Once dried, apply a coat of fungicidal treatment on the surface which will be coated the same day. Apply a thin coat of Clear Binder where necessary and leave to dry for 3h minimum. Apply 2 coats of SILK SHEEN paint, leaving each coat to dry 3h minimum.
Dilute with water: 20% for brush
20% for roller
30% for spray gun
Approximately 1h to touch dry, can be over-coated after approximately 4h.